Andrew James AJ000208 Barbeque User Manual
Page 8

8
stand (Make sure that the grill stand is placed on a dry, flat and
stable surface).
Put the fat collecting tray (4) into the bracket supplied and
secure it to the base of the appliance (the fat collecting tray
can be filled with a little amount of water to make it easier to
clean).
Place the grill plate (3) on the base of the appliance (5). Firstly
inserting the appliance socket (15) into the opening intended
for it (12), then set the grill plate horizontally on the appliance
base.
Install the Metal grill hood (1) into the Base (5) (if you are using
the grill in the open air, position the metal grill hood so that it
acts as a wind breaker).
Push the detachable temperature regulator (13) as far as it will
go into the grills appliance socket.