Andrew James AJ000208 Barbeque - Manual (Page 7)

7
Installation instructions
Install the stand feet (10 A) into the stand base (10 B) properly.
There will be a “click” sound when the stand foot is fixed.
Place the washer (16) onto the stand base and then install the
screws (17) into the washer to fix the stand feet and stand base
firmly in place.
Install half of the threaded rod (a) into the nether tube (9).
Put the decoration (8) on the nether tube (9) and assemble
both tubes together; ensure that they are correctly fixed
together.
Connect the grill stand base (10) and the nether tube (9)
together to form the complete grill stand (the grill can be used
with or without this stand).
Install the screw (b) into the upper tube (7) and then put the
condiment tray on the upper tube (making sure that the tray is
securely fixed).
Place the bowl-shaped base of the appliance (5) onto the grill