Andrew James AJ000254 Professional Magnetic Knife Storage Rack - Manual (Page 3)

3
6. We advise you to use wall plugs if attaching the knife Rack to surfaces such
as stone, concrete, brick, plasterboard and any other hard surfaces excluding
wood and metal.
7. If you are unsure seek professional advice from a qualified person.
8. Hold up the knife rack where you would like to install it and use a spirit level
if required to ensure that the knife rack is straight.
9. Use a pencil to mark the screw holes.
10. While holding up the knife rack, insert one screw into the wall through one
of the pre drilled holes on the knife rack using the screw driver, then use the
spirit level to ensure the knife rack is straight before inserting the second
screw to attach the knife rack completely onto the wall.
11. Ensure the knife rack is securely attached to the wall.
12. Once the knife rack is successfully attached to the wall, test the holder by
placing your knifes on to it. The knife rack should hold the weight of the
knives without the knife rack moving at all.
Caution

Ensure when drilling or putting screws into walls that there are no pipes or
wires.

Ensure that the knife rack is attached to wall and is kept away from children .