Andrew James AJ000254 Professional Magnetic Knife Storage Rack User Manual
Page 2
2
Product description
Dimensions: 45cm length /6cm width. Complete with wall fittings
Weight: 574g
Magnetic properties
Stainless steel
Hold a maximum capacity of 2.5 - 3 kgs
Screw length: 4.5cm
Parts needed for Installing the appliance
Spirit level
Screwdriver
Pencil
Wall plugs (optional)
Electric Drill with pilot attachment (optional)
Installation Instructions
1.
Measure the knives that you will be using, so that the knife rack has
adequate space.
2.
Choose the area where you would like to put up your magnetic knife rack.
3.
Ensure there is enough space for your biggest knife to be placed and
removed with at least 1-3 inches of clearance space above and below any
kitchen surfaces, appliances and cabinets.
4.
The Magnetic Knife Rack has 2 pre drilled holes and is designed to be
screwed directly on to the wall in one piece with the supplied screws.
5.
If you are installing the knife rack into a wall made of stone, concrete, brick,
or plasterboard etc. use an electric drill with the pilot attachment to drill
pilot holes to avoid causing damage to the wall surface.