Hotpoint Ariston CP9VP6 DE HA - Manual (Page 21)

GB
21
TIMER (ELECTRIC OVEN)
This feature allows you to program the oven or the grill as
follows:
• Delayed cooking start time with a specified duration;
• Immediate start with a specified duration;
• Timer.
Button functions:
: timer with hours and minutes;
: cooking time;
: cooking end time;
: manual change;
-: set cooking time (countdown);
+: set cooking time (counting upwards from zero).
How to reset the digital clock
After the appliance has been connected to the power supply,
or after a power cut, the clock display will begin to blink,
showing the figure: 0.00
• Press the and buttons simultaneously, then set
the exact time (within 4 seconds) using the - and +
buttons.
The button + brings the time value forward.
The button - brings the time value back.
The time can also be changed in the following two ways:
1. Repeat all of the steps above.
2. Press the button, then use the - and + buttons to
update the time.
Operating the oven manually
Once the time has been set, the programmer automatically
switches to manual mode.
Note: Press the button to restore the manual mode after
every “Automatic” cooking session.
Delayed cooking start time with a specified duration
The total cooking duration and the time at which the cooking
will finish must be set. If we suppose that the time display
reads 10:00:
1. Turn the oven control knob to the desired setting and
temperature (example: static oven mode at 200°C).
2. Press the button, then set the desired cooking
duration (within four seconds) using the - and +
buttons. Supposing the cooking duration is set at 30
minutes, the display will read as follows:
Release the button, and within 4 seconds, the current time
will reappear with the
symbol, along with the word “auto”
3. Press the button, then use the - and + buttons to
set the desired cooking end time. Let us suppose this
time is 1:00 p.m.
4. After the button has been released, the current time
will be displayed after approximately 4 seconds:
When the text “auto” appears, this indicates that the
cooking duration and the time it is due to finish have been
programmed in automatic mode. At this point, the oven will
switch on automatically at 12:30 and switch off after 30
minutes. When the oven is switched on, the symbol
will
be displayed for the entire cooking duration. The cooking
duration can be displayed at any time by pressing the
button, and the time it is due to finish may be displayed by
pressing the button.
Once cooking is complete, a buzzer will sound; to turn it off,
simply press any button except the - and + buttons.
Immediate start with a specified duration
By programming just the duration (points 1 and 2 of the
“Delayed cooking start time with a specified duration”
section), cooking will begin immediately.
To cancel a cooking schedule which has already
been programmed
Press the button and use the - button to reset the time to
then press the manual cooking mode button .
Timer feature
The timer feature allows you to enter a specific amount of
time and counts down from this time to zero. This feature
does not switch the oven on or off; it merely sounds a buzzer
when the set time has elapsed.
When the button is pressed, the following appears:
Then use the – and + buttons to set the desired time.
As soon as the button has been released, the timer will start
to count down and the current time will be displayed.
After the time has elapsed, an audible signal will be emitted;
this can be switched off by pressing any button (except the
– and + buttons). At this point the symbol will also switch
off.
Correcting/deleting data
• The data entered can be changed at any time by
pressing the corresponding button and the – or +
buttons.
• When the data for the cooking duration is deleted, the
data for the cooking end time is also deleted
automatically, and vice versa.
• If the oven has already been programmed, it will not
accept cooking end times which are before the start of
the programmed cooking process.