Physio-Control TrueCPR - Manual (Page 10)

4 TrueCPR Device Instructions for Use
Using the TrueCPR Device
Using the TrueCPR Device
Performing CPR
To use the TrueCPR device:
1 Confirm patient is in cardiac arrest.
2 Remove the device from the carrying bag.
3 Separate the chest pad and back pad.
Back Pad
Item Description
1
Battery Readiness Indicator: Flashing LED on back pad handle
indicates battery capacity is sufficient for at least 25 minutes of
operation. Note: LED flashes approximately once every 4 seconds.
2
USB Port Cover: Provides access to USB port. Use a coin or similar
tool to open.
3
Battery Compartment: Holds two nonrechargeable Duracell ® DL123
batteries. Use a coin or similar tool to open.
1
2
3
3308456-900.book Page 4 Wednesday, October 24, 2012 9:51 AM