Imetec ECO E1 - Manual (Page 18)

EN
16
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149
M
I0
0
1
1
2
0
0
2
1
3
(M
M
YY
)
The clogged filter
indicator is on.
Ʒ The dust collection system (15) is full: empty the dust
collection compartment (15A).
Ʒ The filter is clogged: clean or replace the filter.
Ʒ The clogged filter LED (20) can even light up if the
power decreases, caused by an object that is too big
clogging the suction pipes: switch the appliance off,
º¿Й¹ЕДД»¹КК¾»ЖВЛ½¼ИЕГК¾»ЙЕ¹Б»К·ДºИ»ГЕМ»К¾»
object from the vacuum cleaner.
Ʒ A crevice tool is being used: reduce suction from the
electronic adjustment.
The dust collection
system does not
close correctly.
Ʒ A safety device does not allow the dust collection
system to be inserted if the Hepa filter (15E) is missing.
Ʒ ·Б»ЙЛИ»К¾»»Ж·¼¿ВК»И¿ЙЖИ»Й»ДКƺʸʼƻ·Дº¿К¿Й
fitted correctly.
The vacuum cleaner
produces odours the
first few times it is
used.
Ʒ These odours are harmless and disappear shortly
afterwards. Ventilate the room.
DISPOSAL
¾»ÆÈÅºË¹К¿ЙЖ·¹Б·½»º¿ДИ»¹П¹В·¸В»Г·К»И¿·ВЙƔ¿ЙЖЕЙ»Е¼¿К¿Д¹ЕГЖВ¿·Д¹»Н¿К¾К¾»
environmental protection standards.
The appliance must be disposed of in compliance with EU standard 2002/96/EC.
The recyclable materials contained in the appliance must be collected to prevent
environmental pollution. For further information contact the local waste authority or
the appliance retailer.
ASSISTANCE AND WARRANTY
To request repairs or purchase spare parts please contact IMETEC’s authorised customer
service centre on the Toll-Free Number below or via the website.
The appliance is covered by the manufacturer’s warranty. For details, read the attached
warranty sheet.
Failure to comply with the instructions for use and maintenance provided in this manual will
render the manufacturer’s warranty null and void.