Imetec SILENT POWER COMPACT - Manual (Page 15)

EN
13
DO NOT PULL THE CABLE BEYOND THE RED MARK.
Using the vacuum cleaner with the cable fully or partly wound involves
an overheating hazard!
NOTE:
Bear in mind that a new appliance can develop odours the first few times it is used.
These odours are harmless and disappear shortly afterwards. Ventilate the room.
Press the ON/OFF button (3) once to switch the vacuum cleaner on or off .
The electronic power control (4) allows you to adjust the suction force:
Minimum: for curtains, fine and delicate fabrics.
Average: ideal for standard cleaning of sofas, armchairs, upholstered chairs, rugs and
carpets.
Maximum: for smooth floors.
The suction power can also be changed by means of the manual adjusting device of the air
flow (9) (where present) found on the handle (8) [Fig. F2]:
Closed: increases the suction power.
Open: reduces the suction power.
Open the manual adjustment device of the air flow (9) (where present) to reduce the suction
power if an object, which has been drawn, blocks the opening.
Switch the appliance off after use, by pressing the ON/OFF button (3) and disconnect
the plug from the socket. Press the automatic cord winding button (5) to wind the power
cord [Fig. G1].
Hold the plug while winding the cord in order to prevent whiplash.
The flexible suction pipe (10) can be disconnected from the appliance before putting it away.
To do so, press the flexible suction pip fastening buttons (10A) and disconnect the flexible
pipe.
MAINTENANCE
ATTENTION!
Switch the appliance off and disconnect the plug from the socket before
opening the appliance! Make sure all cleaned parts are completely dry
before reusing the appliance!
CLEANING THE APPLIANCE
When necessary, clean the appliance with a damp cloth.
ATTENTION!
DO NOT USE SOLVENTS OR OTHER AGGRESSIVE OR ABRASIVE
DETERGENTS. THIS CAN DAMAGE THE SURFACE.
MI000956_corretto.indd 13 18/12/2012 17:36:11