beautypg.com

Problems and solutions, Disposal, Service and warranty – Imetec ECO CH User Manual

Page 13

background image

GB

• Remove the protection from the blades (3) [Fig. B].

• Insert the blades (3) on the pin (5) [Fig.C].

• Place the ingredients chopped into small portions in the bowl (4).

• Place the protection ring (2) on the bowl (4) [Fig D].

• Place the motor unit (1) on the bowl (4).

• Insert the plug in the socket.

• Press the motor unit (1) down to operate the appliance [Fig. E].

• Release the motor unit (1) to stop the appliance.

• Before lifting the motor unit (1), wait for the blades (3) to stop.

PROblEMS AND SOlUTIONS

Should any of the problems indicated occur, adopt the proposed solution:

Problem

Possible cause

Solution

The parsley has not

been chopped properly. The parsley is wet.

Repeat the operation using dry

parsley.

Once processing has

been completed, there

is food at the bottom of

the motor unit (1).

There is too much

processed food.

Do not exceed the maximum level

indicated on the bowl (4) [Fig F].

There is too much liquid

content compared to the

solid one.

Reduce the liquid content in relation

to the solid one.

DISPOSAl

The product is packaged in recyclable materials. Dispose of it in compliance with the

environmental protection standards.

The product must be disposed of properly, in accordance with the provisions of

European standard 2002/96/EC. The recyclable materials contained in the appliance

must be recovered so as to prevent environmental pollution. For further information,

contact the local disposal body or the appliance dealer.

SERvICE AND wARRANTy

To request repairs or purchase spare parts, please contact IMETEC’s authorised customer

assistance service consulting the website. The appliance is covered by the manufacturer’s

warranty. For details, read the attached warranty sheet.

Failure to comply with the use and maintenance instructions provided in this user manual

will invalidate all and any rights to the manufacturer’s warranty.

www. imetec.com

Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY

Tel. +39.035.688.111 Fax +39.035.320.149

MI000638

1110 (MMYY)

8