Imetec BIMBO HM3 - Manual (Page 8)

6
GB
6. Remove the protection cover from the cutting blades before using them. Handle the cutting blades with
care. Be particularly careful when taking the blade out of the bowl or when emptying or cleaning it.
Never dip the appliance in water or place it under a running tap.
7. Before cleaning or servicing the appliance, disconnect it from the mains by removing the plug.
8. Should the appliance break down and/or fail to work properly, turn it off and do not tamper with it. If it
needs repairing, take it to an authorised IMETEC Service Centre.
9. Do not attempt to replace the power cord. If it is damaged or needs replacing, contact an authorised
IMETEC Service Centre.
10. Should you decide not to use the appliance any more, make it inoperative by cutting the power cord
after removing the plug from the socket. We also recommend making all potentially dangerous parts of
the appliance harmless, particularly for children who might be tempted to play with it.
11. This appliance should not be used by children or persons with partially reduced physical, sensorial or
mental faculties, and in any case not without specific knowledge and experience, or without the
supervision or instructions for use provided by a responsible person.
12. Children must not be allowed to play with the appliance.
GENERAL INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES [Fig. Z]
Please consult Figure [Z] in the image section to check the content of the packaging.
All figures can be found on the inside pages of the cover.
1 Motor unit 4 Blade pin
2 Protection cover 5 Container
3 Stainless steel blade 6 Power cord
ON AND OFF CONTROL
The mini chopper can be used in two ways.
FUNCTION USE
Pulse action
(press and release)
Ideal for mincing.
Continuous action
(keep pressed for the
required time)
Ideal for high-speed processing.
SAFETY SYSTEM FOR IMMEDIATE MOTOR SHUTDOWN
A safety system stops the appliance from functioning if the following accessory is not properly assembled:
- protection cover (2).