Imetec BELLISSIMA G9 90 User Manual

Page 17

insert the brush (12) onto the accessory with the fastening

clip turned downward until you hear a click;

• take a small lock of hair and wind it around the brush (12)

taking care not to wrap the same lock more than once

around the brush;

• release the lock after a few seconds;
• adjust the wave with your hands.
Curly effect
• Insert one of the three available curling tongs (14, 15, 16)

onto the heating element (1) keeping the supporting clip

in the lower position;

• take a small lock of hair between your fingers: the smaller

the locks, the tighter the curls;

• open the curling tong’s lever and wind the lock entirely

around the tube, then close the lever;

• wait until the lock takes the desired shape before releasing

it from the tong by opening the lever;

• adjust the curl with your hands.
Well-defined ringlets
• Insert the medium curling tong (15) onto the heating

element (1) keeping the supporting clip in the lower

position, then insert the spiral accessory (13);

• take a lock of hair, open the curling tong lever, then anchor

the lock between the tube and the lever;

• turn the multistyler, winding the lock around the spiral

accessory;

• open the lever after a few seconds and free the lock by

unwinding it from the spiral;

• adjust the ringlet with your hands.
Crinkle effect
• Connect the crinkle effect plates (9) onto the plate

support (7) making sure the top and bottom of the plates

fit together;

• assemble the plate support (7) onto the heating element

(1);

• take a small and thin lock of hair of the same size as the

plate between your fingers and place it between the two

plates;

• a slight pressure is enough;
• move the plate downward taking care not to overlap the

already styled hair;

• repeat this action along the length of the lock of hair.

MI000468_internaz.indd 15

01/03/11 22.11