Imetec BELLISSIMA G9 90 - Manual (Page 16)

14
INSTRUCTIONS FOR USE
Slide the accessory onto the heating
element (1) making sure that the
curling tong or straightener lever is
facing upwards;
Rotate the regulating nut (2) counter
clockwise until the arrow on the nut (2)
is aligned with the arrow on the handle
(4);
- connect the power cord (6) to the mains;
- move the button 0-1 (15) to position 1 and wait until the
appliance is hot;
- proceed with styling;
- when you have finished styling, move the button 0-1 (5) to
position 0 and disconnect the plug from the mains socket;
- wait for the heating element to cool down (1) and remove
the accessories.
WARNINg! RISK OF BURNS
- to remove the accessories, rotate the regulating nut (2)
clockwise until it clicks and slide the accessory off the
heating element (1).
THE EFFECTS yOU CAN ACHIEVE
Straight effect
• Insert the smooth plates (8) onto the plate support (7)
until it clicks;
• assemble the plate support (7) onto the heating element
(1);
• take a small and thin lock of hair of the same size as the
plate between your fingers and place it between the two
plates; use one hand to hold the lock in place and use the
other to slide the closed straightener from the roots down
towards the ends.
Wavy effect
• Insert the small curling tong (16) onto the heating element
(1) keeping the supporting clip in the lower position, then
En
MI000468_internaz.indd 14 01/03/11 22.11