Allied Solutions LED Guide Lights - Manual (Page 2)

The LED guide lights allow truck drivers to easily see the
bumper location and center themselves at the docks even in
low light conditions
Designed, Engineered and Manufactured in the U.S.A. © 2008 Systems, Inc. LED Guide Lights 07/09
W194 N11481 McCormick Drive • Germantown, WI 53022
Phone: 262.255.1510 • Fax: 262.255.4199
Toll-Free: 800.643.5424
or visit us on the web at…www.alliedproductsolutions.com
Distributed By:
The Allied Solutions LED guide light provides a
clear definable target for the truck driver. Each
guide light uses 6 bright yellow LED lights to de-
fine the outside edge of the dock bumpers allow-
ing truck drivers to accurately position their trucks
at the door.
The Allied Solutions LED guide light is controlled
by a key style inside light switch with an LED pow-
ered indicator. This gives the user the ability to
power up the lights and keep them on. The LED
indicator light allows the operators on the inside
of the building to easily recognize that the guide
lights are activated.
The LED guide lights run off of low, 12 volt DC
voltage transformed in the control box for safe re-
liable operation.
Standard Unit Includes:
• Two bright LED guide lights
• Key style control station with step down
transformer (115 to 12 volt)
• Two mounting bracket bases
LED Guide
Lights
Communication Unit Includes:
• One driver side combination guide and
communication light
• One standard guide light
• Key style control station with step down
transformer (115 to 12 volt)
• Two mounting bracket bases