Xylem RG700 4-20 mA Output Module - Manual (Page 3)

Global Water
800-876-1172
• globalw.com
- 3 -
I. RG700 Checklist
a. 4-20 mA Output Module
b. RG700 Manual
II. Inspection
a. Your RG700 unit was carefully inspected and certified by our Quality
Assurance Team before shipping. If any significant damage has
occurred during shipping, please notify Global Water Instrumentation,
Inc. and file a claim with the carrier involved. Use the checklist to
ensure that you have received everything needed to operate the
RG700.
III. Description
a. The Global 4-20 mA Output Module, RG700, is a rugged, reliable, and
accurate instrument for converting input pulses into a 4-20mA analog
output signal.
IV. Installing the 4-20 mA Output Module
a. Place the module in an area that is protected from direct rainfall and
immersion in water. The module is water resistant, not water proof.
b. The pulse device is connected to terminals 1 and 2. Polarity is not an
issue. Please refer to Appendix A: RG700 terminal diagram.
c. Terminals 3-5 are output ports which are not used. Terminal 4 is the
4-20mA current output.
d. Terminals 6-8 are the module’s power terminals. Terminal 6 is the
positive voltage input switch to the attached sensor. Positive voltage
goes into terminal 7. Terminal 8 is for the ground signal.
e. If the unit is intended to operate indefinitely, connect terminals 6 and 7
together.