1 connecting the photometer to the pc, 2 setting up the activesync® connection, Setting up the connection and starting the program – Xylem SpectralTransfer User Manual
Page 7: Connecting the photometer to the pc, Setting up the activesync
SpectralTransfer
Setting up the connection and starting the program
7
01/2008
3
Setting up the connection and starting the
program
3.1
Connecting the photometer to the PC
A USB cable (type A - type B) is required for the connection.
Proceed as follows:
Note
ActiveSync
®
is preset to start automatically as soon as the photometer is
connected to the PC. If this setting has been changed you have to start
ActiveSync
®
manually, e.g. in the Windows
®
start menu. You can then adjust
the connection settings (menu, File->Connection settings...).
3.2
Setting up the ActiveSync
®
connection
After the start of ActiveSync
®
the following window appears:
1
Switch on the photometer.
2
Switch on the PC and log in if necessary.
3
Connect the photometer to the PC with the aid of the USB cable.
The ActiveSync
®
program recognizes the connected instrument and
starts automatically (see section 3.2)