Xylem STORM Central - Manual (Page 11)

Collect data with Storm Central
9
To complete the connection setup with
Storm Central, navigate to the Storm
Central Setup page on the Storm data
logger.
The Transmit Rate determines the rate
at which your Storm data is transmitted
to Storm Central. This rate should not
be faster than any Scan Rate on the
Storm data logger. If the Transmit Rate is
slower than Sensor Scan Rates, any data
collected since the last transmission will
be transmitted to Storm Central on its
next connection.
The final step is to press the Verify
Registration button to have the modem
communicate with Storm Central. When
the Registration ID is verified, Storm
Central links and sets up the Storm data
logger on your account. Next time you
log in to Storm Central, the Site will be
available. All future updates to the Storm
data logger will be replicated on Storm
Central and data will begin flowing in at
the next transmission. Your Storm Central
setup is now complete.
Select Storm Central from the Server Type field and enter the Registration ID retrieved from Storm
Central as detailed on page 5. The Registration ID is case-sensitive, be sure to enter it exactly as
shown on Storm Central.
Setup Page
Verify Registration