Xylem SuSix Sensor with Wiper - Wiper and Gasket Replacement Kit 206355 User Manual
Wiper and gasket replacement kit for susix, Sensor with wiper

www.mjk.com
DK: +45 45 56 06 56
NO: +47 69 20 60 70
SE: +46 53 31 77 50
NL: +31 251 672171
IRL: +353 879535625
USA: +1 847 482 8655
AUS: +61 3 9758 8533
GB/DK Wiper and Gasket Rep Kit 100127
1
Wiper and Gasket Replacement Kit
for SuSix
®
Sensor with Wiper
Contents
Part no. 206355 including:
• 1 pc. screwdriver
• 7 pcs. screws
• 5 pcs. wipers
• 5 pcs. gaskets
Required accessories
A soft cloth and part no. 206360 including:
• 1 pc. draw tool
Use
Wiper and gasket replacement of MJK SuSix
®
Sensor (part no. 206312) with cleaning
system/wiper from serial no. 49482 to 51499 incl.
Reservations
Replacement of wiper and gasket must be carried out by MJK authorized and trained
personnel in an electrostatic discharge (ESD) secured area.
Installation
1. Move the sensor from the process fluid.
2. Disconnect the sensor from the converter and all electrical connections.
3. Clean and wipe the sensor off thoroughly, and position it in a stable, upright position.
4. Unscrew the screw and dispose of the wiper (see figure 1).
Figure 1. Unscrew the screw and dispose of the wiper
5. If required, carefully remove any dirt in the gasket rill with the screwdriver.
Make absolutely sure that dirt, moisture or liquid do not get into the sensor !