YSI IQ SensorNet MIQ/PS Module - Manual (Page 6)

Overview MIQ/PS
1 - 2 ba76029e01 01/2012
1.2 Features of the MIQ/PS
General characteristics The MIQ/PS wide-range power supply supplies the IQ S ENSOR N ET
with its operational voltage. The operational voltage is forwarded to the
consumers in the following ways:
 In the case of stacked mounting, via the IQ S ENSOR N ET contacts on
the front and rear of the module
 In the case of distributed mounting, via the IQ S ENSOR N ET SNCIQ
cable

In the case of sensors, via the SACIQ sensor connecting cable.
With the standard MIQ module housing, the MIQ/PS has the same
characteristics as all MIQ modules regarding stability, leakproofness
and weather resistance. It also provides the same wide variety of instal-
lation options (stacked mounting, canopy mounting, tophat rail
mounting, etc.).
The number of MIQ/PS that are required depends on the number of
consumers in the system and their power requirement as well as on the
overall loss of power in the IQ S
ENSOR N ET cables. Instructions for
determining the correct number of power modules are given in the
I
NSTALLATION chapter of the system operating manual.
Terminal strip The MIQ/PS has the following electrical connections on the terminal
strip inside the housing:
 1 x mains connection, two-pole
 3 x SENSORNET connection.