Xylem 19 001 351R2 PACE Integrated Pump Controller Human Machine Interface (HMI) for the Silent Storm VFD Pumping System – User Guide - Manual (Page 9)

9
Figure 5: Operation Menu
SYSTEM VIEW & TRENDS
Tap [System View] from the Operation menu.
System View accesses color-coded operational
trends or historical data for several system
variables such as flow, pressure, speed, and
setpoint.
Figure 6: Trends Screen
In the System View screen, a supervisor can
change the setpoint using the User SP field.
You can turn on and off logged channels on the
viewer by tapping the value at the bottom of the
screen.
Power readings may not be available on all
systems. Also on some systems a power reading of
0 will cause the Power display to disappear, and will
reappear when power readings return.
Demand is a function specific to interaction with
Lynx irrigation control systems and will only display
when this data is available from Lynx.
Configure Period Screen
Tap from the System View menu.
The Configure Period screen allows you to set a
date and duration for viewing system information.
The trends will be shown for the Duration value,
ending at the current time. When ‘Now’ is checked,
the system defaults to the current date and time. If
‘Now’ has been checked, ‘Duration’ is the only
editable field.
For viewing historical data, uncheck ‘Now’.
Enter the start date and time, along with duration to
view data for desired time. Tap [Apply] to apply
changes or [Close] to cancel any changes.
NOTE: If ‘Now’ is left unchecked, the system does
not default back to the current date and time.
Figure 7: Configure Period
The trends graph may be enlarged for a better view
by tapping on it.
FLOW TOTALS
Tap [Flow Totals] from the Operation menu.
The totalized values (in GAL) for the daily, weekly,
monthly, and yearly flow are displayed in a tabular
format.
Tap [Next] to successively view the totals for each
day, week, month and year. Use the scroll bar to
move up and down or left and right.
Figure 8: Flow Totals, Overview