En gl ish – Acer K520 User Manual
Page 16
6
En
gl
ish
10
Backlight
Press "
" to trigger backlight mode
•
Continue to light 3 sec then disappear if no action.
•
Continue to light if action and keep 3 sec finally.
11
Enter
No function.
12
Four directional
select keys
Use up, down, left, right buttons to select items or make
adjustments to your selection.
13
KEYSTONE
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
14
MENU
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
15
MOUSE Left/
Right Click
Left-/right-click buttons are on the left and right,
respectively; the center button works as a multidirectional
pointer stick. To enable this function, an USB cable must be
connected to projector from your PC.
16
Empowering key Unique Acer functions: eView, eTimer, e3D, ePower
Management.
17
VOLUME
Increases/decreases the volume.
18
PAGE
For computer mode only. Use this button to select the next
or previous page. This function is only available when
connected to a computer via a USB cable.
19
Prev
No function.
20
Next
No function.
21
Play/Pause
No function.
22
Stop
No function.
23
VGA
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
24
S-VIDEO
To change source to S-Video.
25
COMPONENT
No function.
26
VIDEO
To change source to COMPOSITE VIDEO.
27
SD/USB A
No function.
28
USB B
No function.
29
HDMI™/DVI
Press "HDMI™/DVI" to change source to HDMI™.
30
LAN/WiFi
No function.
31
KeyPad 0~9
Press "0~9" to input a password in the "Security".
#
Icon
Function
Description