Acer X1111 - Manual (Page 34)

24
En
gl
ish
Sharpness
Adjusts the sharpness of the image.
• Press to decrease the sharpness.
• Press to increase the sharpness.
H. Position
(Horizontal
Position)
• Press to move the image left.
• Press to move the image right.
V. Position
(Vertical
Position)
• Press to move the image down.
• Press to move the image up.
Frequency
Changes the projector’s refresh rate to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar in the projected image, use this function to
correct it.
Tracking
Synchronizes the signal timing of the display with the
graphics card. If you experience an unstable or flickering
image, use this function to correct it.
3D
Selects "NVIDIA 3D Vision" or "DLP 3D" to enable the 3D
function supported by NVIDIA or TI DLP 3D technology.
• NVIDIA 3D Vision (X1111)
Select this item while using NVIDIA 3D glasses, IR emitter,
NVIDIA graphics card and NVIDIA compliant 3D games or 3D
movies with corresponding SW player. Please visit NVIDIA
URL (http://www.nvidia.com/object/
3D_Vision_Requirements.html) to check detailed system
configuration.
• DLP 3D
Select this item while using DLP 3D glasses, quad buffer
(NVIDIA/ATI...) graphics card and HQFS format file or DVD
with corresponding SW player.
• Off
Turns off the 3D mode.
3D Sync Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
3D Warning
Message
Choose "On" to display the 3D warning message.