English – Acer P7203B User Manual

Page 35

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions

are not supported under HDMI, DVI or Video mode.

Note: "Sharpness" function is not supported under HDMI, DVI or computer

mode.

Note: PIP, PIP source, PIP Location and PIP Size are not supported under

Video mode.

Keystone

Adjust image distortion caused by tilting projection. (±40 degrees)

H Keystone

Press the

to adjust image distortion horizontal and makes

a squarer image.

V Keystone

Press the

to adjust image distortion vertical and makes a

squarer image.

H. Position

(Horizontal

position)

•

Press

to move the image left.

•

Press

to move the image right.

V. Position

(Vertical position)

•

Press

to move the image down.

•

Press

to move the image up.

Frequency

"Frequency" changes the projector's refresh rate to match the

frequency of your computer’s graphics card. If you can see a vertical

flickering bar in the projected image, use this function to make the

necessary adjustments.

Tracking

Synchronizes the signal timing of the projector with the graphics card.

If you experience an unstable or flickering image, use this function to

correct it.

Sharpeness

Adjusts the sharpness of the image.

•

Press

to decrease the sharpness.

•

Press

to increase the sharpness.

PIP

•

Choose "On" to to see two screens at the same time.

•

Choose "Off" to disable the function.

PIP Source

Press

and

to choose the secondary video source: Composite,

S-Video or Component signal.

PIP Location

Choose the PIP secondary signal location on the display screen.

PIP Size

Choose the PIP secondary signal size on the display screen.