Acer AT3228ML - Manual (Page 30)

English
30
Digital Teletext language
Select the primary language used for digital teletext pages.
SPDIF type
Select a proper sound type for the current programme to output sound to the auido device
connected through the SPDIF output terminal. The options you may choose depend on the
programme you are watching. If the programme outputs sound in Dolby D format, you can
select Dolby D or PCM. If the programme does not output sound in Dolby D format, you can
select PCM only, otherwise no sound output. You can select Off to turn off the sound output.
SPDIF delay
If PCM is selected for SPDIF type, you can adjust the delay time to synchronize the sound with
the image at this option.
Clear.fi link
Search for CEC (Consumer Electronics Control) devices connected to the HDMI ports on your
TV. CEC allows you to control several devices with a single remote control.
Network update
Turn on or off network update function.
Common interface
Displays information about any card installed in the common interface slot. You have to
switch off the TV before inserting a card. Be sure to insert the card gently and push it in as
far as it will go. Wrong insertion may damage both the card and your TV.
Location
Select your location: Home or Shop.
Note: In Home mode, the TV will automatically enter Standby mode if there are no
operations performed for more than four hours.
Software update
Current version
Display the current version of the software.
Product name
Display the model number.
OAD (over air download)
Enable you to install the lastest version of the software if availalbe. Press OK to enter the
setup menu. Select Manual OAD download and press OK to start manual scanning the latest
software. Press OK/BACK to cancel or exit the process.
Select Auto download and press left/right to select Yes to execute the automatic download or
select No to decline the automatic download.