Determining the drive status, Removing and installing a hard disk drive, Removing a hard disk drive with carrier – Acer AR320 F1 User Manual
Page 43
25
Determining the drive status
Each HDD carrier features two status LED indicators (see page 3) to
display the hard drive status. If you are replacing a failed HDD,
determine which drive has failed by checking the hot-plug HDD status
indicators.
Removing and installing a hard disk drive
Removing a hard disk drive with carrier
If you intend to replace a HDD and need to remove the old drive,
proceed to the instructions below.
1
Observe the ESD precautions described on page 22.
Description
Green
Red
Onboard SATA or RAID card without SGPIO support
HDD present
On
Off
HDD access
Blink
Off
LSI RAID card with SGPIO support
HDD present no access
On
Off
HDD access
Blink
Off
HDD failure
On
On
HDD removal
Off
Off
HDD insertion and rebuilding
Blink (1 Hz)
HDD locate
Blink (4 Hz)