Miele S8 UniQ - Manual (Page 36)

After that, the vacuum cleaner will
switch on at the setting which was used
previously.
During vacuuming (dia. 19)
^ When vacuuming, pull the cleaner
behind you on its wheels. You can
stand it upright for vacuuming stairs
and curtains etc.
,
When vacuuming especially fine
dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc.,
electrostatic charges build up
naturally. Under certain conditions
these charges will be released. To
avoid the unpleasant effects of
these discharges, a metal inlay has
been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming.
Illuminating the work area (dia. 20)
Your vacuum cleaner is equipped with
an LED on the handle to illuminate the
work area.
^ Press the I button on the LED
handle.
It will switch itself off automatically after
approx. 30 seconds.
Setting down, transportation
and storage
Parking system for pauses in
vacuuming (dia. 21)
(cannot be used with the SEB 234 L
Electro Premium Electrobrush)
A parking system has been designed
for conveniently parking the suction
tube and floorhead during pauses.
^ Slot the floorhead into the parking
attachment at the back of the
vacuum cleaner.
If the vacuum cleaner is on a
sloping surface, e.g. a ramp, retract
the suction tube fully.
Switching on and off with the parking
system
The vacuum cleaner switches off
automatically when the floor head is
slotted into the parking system with the
parking attachment.
When the floorhead is removed from
the parking system the vacuum cleaner
switches back on at the last selected
power level.
Parking system for storage (dia. 22)
,
Warning. Always disconnect the
vacuum cleaner from the electrical
supply when you have finished
using it. Switch the vacuum cleaner
off at the wall socket and unplug it.
The parking system lighting will switch
off approx. 30 seconds after
disconnecting the vacuum cleaner from
the mains.
en
36