Miele S8 UniQ - Manual (Page 34)

Clean flooring which has deep
crevices or grooves with the brush
protruding.
AirTeQ floorhead (dia. 8)
This floorhead has been specially
developed to achieve excellent
cleaning results using low energy. It
has particularly low power consumption
and high suction capability.
,
Warning: If the suction power of
the AirTeQ floorhead seems too
high, reduce the suction until the
floorhead is easier to manouevre
(see "Use - regulating the suction").
Inserting batteries into the LED
handle (dia. 9 + 10)
a Loosen the screws on the cover.
b Press down on both sides of the
cover to remove.
c Take out the battery holder and
insert the three batteries supplied
making sure they are the right way
round.
d Replace the battery holder. in the
direction of the arrows on the holder
and battery compartment, so that
both line up.
e Replace the cover and tighten the
screws.
Using the accessories
supplied (dia. 11)
The following accessories are supplied:
a Crevice nozzle
For cleaning in folds, crevices or
corners.
b Dusting brush with natural bristles
For cleaning skirting boards, ornate
or carved objects.
The head can be swivelled to adjust
the angle.
c Upholstery nozzle
For cleaning upholstery, mattresses,
cushions, curtains, covers etc.
Removing the accessories (dia. 12)
^ Press the release button to open the
accessories compartment lid.
The accessories compartment will then
open.
^ Take out the accessory you require.
^ Press down firmly on the lid to close
it.
Floorhead (dia. 13)
For general use and also for vacuuming
stairs.
,
Warning: For safety reasons
when vacuuming stairs it is best to
start at the bottom of the stairs and
move upwards.
en
34