C2G 40383 HDMI Repeater User Manual

Page 4

Features:

• HDMI™ (v1.3 with Deep Color, CEC, x.v.Color™ Dolby True HD™, DTS-HD Master

Audio™)

• Supports full 1080P high-definition video

• Extend HDMI™ signal up to 130 feet or daisy-chain a second repeater to get 200 feet*

• Fully HDCP compliant

• Simple design and connections

• Unique voltage inserter (included) allows power supply to be placed at source

Note-To maximize signal quality at extended lengths, be sure to use quality High Speed HDMI™

cables. Each cable from the source to Repeater and Repeater to display should not exceed 65ft.

Connecting the HDMI™ Repeater

1. Insert the Voltage Inserter into the HDMI™ output of the source device (DVD player, set top

box, gaming system, etc.)

2. Connect an HDMI™ cable to the open end of the Voltage Inserter and connect the other end

of the HDMI™ cable to the HDMI™ Input on the HDMI Repeater.

3. With another HDMI™ cable, connect one end to the HDMI™ Output on the HDMI™ Repeater

and connect the other end to the HDMI™ input on your monitor/display.

Note: The HDMI™ Repeater is designed to accept the included Voltage Inserter or a standard
AC/DC adapter (not included) for power. Do not use both the Voltage Inserter and AC/DC
adapter at the same time.

Daisy-Chaining the HDMI™ Repeater

1. Complete steps 1-2 from the above section, “Connecting the HDMI™ Repeater”.

Voltage Inserter

HDMI™ Repeater

HDMI™ cable

2. Insert the second Voltage Inserter to the HDMI™ output on the first HDMI™ Repeater.

3. Connect an HDMI™ cable to the open end of the second Voltage Inserter and connect the

other end of the HDMI™ cable to the HDMI™ Input on the second HDMI™ Repeater.

4. With another HDMI™ cable, connect one end to the HDMI™ output on the second HDMI™
Repeater and connect the other end to the HDMI™ input on your monitor/display.