C2G 30506 USB 2.0 4-Port Manual Share Switch UH846 - Manual (Page 2)

Model USB 2.0 4-Port Share Switch
Ports 4 USB type-B connecters (to computers)
1 USB type-A connecter (to a device or a hub)
Power Bus-powered, 500 mA each port
Push Button Reset
Status Lights 4-port indicator LEDs
Storage Temperature -10~85℃
Working Temperature 0~70℃
Hardware Installation
Plug one side of USB cable into a USB port of PC and the other side into share switch
USB type B port. Each PC has right to access a device, when the related LED is on. If
any PC would like to have right to access the device, just double click Scroll Lock
button.
1. Use one USB cable to connect PC1 and share switch USB type B port, whose LED
will blink couple times and keep light on, which means PC1 has right to access the
USB device.
2. Use another USB cable to connect PC2 and share switch USB type B port. The
system will detect this share switch automatically. Now the PC2 is ready to use, but
has no right to a device yet. You just double click the Scroll Lock button at
keyboard, the PC2 related LED will blink couple time and keep light on. Now PC2
has right to use the device. ( Same installation for PC3 and PC4 )
After connecting any USB device to our share switch, you are ready to use the USB
4-port manual share switch by double clicking Scroll Lock button ( Hot Key ) on
keyboard.
Remark: The button on the switch is for resetting the right of the device. After
pressing the button, you just double any Scroll Lock button of a keyboard, whose
PC will get right to access the device.
2