C2G 29596 WIRELESS USB TO VGA AND AUDIO KIT - Manual (Page 40)

39
4. Enter the PIN of the Wireless VGA Device Adapter (4-digit PIN) and click Accept Association. The
Wireless VGA Device Adapter and Wireless USB Host Adapter are now associated and ready for
operation.
5. Repeat Steps 1-4 to PIN associate the TruLink Wireless Audio Device Adapter.
P IN C HANGE P ROCEDURE
The default PIN setting for the Wireless VGA and Audio Device Adapters are “1234”. This section gives
you the instructions to change the PIN to another 4-Digit value.
IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.
1. Make sure your Wireless USB Host Adapter and the Wireless VGA/Audio Device Adapter are not
connected to your computer.
2. Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB
Manager\Utility\PINUpdate). The following dialog will appear:
A PPENDIX