C2G 29353 USB V1.1 RECEIVER DONGLE RJ45 TO USB BM User Manual

Page 6

Text mode
Original mode

Step 1
Install the USB transmitter (29349, 29344, or 29348) by means of wall plate (if using the wall plate style
transmitter) or connect the dongle style transmitter to your computer.

Step 3
Use a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable, and connect the USB
transmitter and USB v1.1 Receiver Dongle.

Step 4
Plug your computer into the source end (USB transmitter unit) using a standard USB A/B cable.

Step 5
Plug the USB v1.1 Receiver Dongle USB B male connector into your device.

Step 6
Turn your computer/source on and you can begin to use your USB devices.

EVICE

NSTALLATION