C2G 29349 USB 1.1 EXTENDER KEYSTONE INSERT-TRANSMITTER - Manual (Page 7)

6
Step 1
Install the USB Extender Keystone Insert in a Cables To Go or Quiktron wall plate, surface box, or any
standard keystone and angled multimedia wall plate or patch panel.
Step 2
Install your USB SuperBooster/Extender receiver unit in the same manner as Step 1, if you are using
the wall plate style receiver or if using the dongle style, you may position this where you your devices
will be connected.
Step 3
Using a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable to connect the USB
Extender Keystone Insert and your USB SuperBooster/Extender receiver unit.
Step 4
Plug your computer into the source end (USB Extender Keystone Insert end) using a standard USB A/B
cable.
Step 5
Plug your USB enabled device/s into the receiver end (USB SuperBooster/Extender receiver unit end)
using a standard USB A/B, A/mini-B or proprietary USB cable that came with your device.
Step 6
Turn your computer/source on and you can begin to use your USB devices.
D
EVICE
I
NSTALLATION