beautypg.com

C2G 29343 USB to Serial DB9 SuperBooster Wall Plate User Manual

Page 6

background image

5

Terminating a Cat5/Cat5E/Cat6 Cable Using the Tool-less IDC


1) Open the plug by lifting the clear plastic end
2) Pin 1 of the connector is on the left side of the clear plastic shell while Pin 8 is on

the right side of the connector (with RJ45 connector facing away from you)

3) Thread the white/orange conductor on your Cat5/5E/6 cable into Pin 1
4) Thread the orange conductor on your Cat5/5E/6 cable into Pin 2
5) Thread the white/green conductor on your Cat5/5E/6 cable into Pin 3
6) Thread the blue conductor on your Cat5/5E/6 cable into Pin 4
7) Thread the white/blue conductor on your Cat5/5E/6 cable into Pin 5
8) Thread the green conductor on your Cat5/5E/6 cable into Pin 6
9) Thread the white/brown conductor on your Cat5/5E/6 cable into Pin 7
10) Thread the brown conductor on your Cat5/5E/6 cable into Pin 8
11) Repeat steps 1-10 to terminate the other end of your Cat5/5E/6 cable

Pin 1

Pin 8