C2G 29970 2-PORT FIREWIRE PCI CARD - Manual (Page 7)

6
This section will explain how to install the FireWire card into your computer.
Step 1
Power off the computer, then disconnect the power cord.
Step 2
Remove each screw found on the back of the computer and remove the shell from the computer.
Step 3
With the power cord disconnected from your computer, you can touch the metal part of the case to ground
yourself. This will discharge any static electricity which can damage your computer.
Step 4
Locate an available PCI slot. This will be in the area of your computer where other cards that look similar
to this one are installed.
Step 5
Visually confirm that the Firewire 1394 port will fit into the available slot you have chosen.
D
EVICE
I
NSTALLATION