C2G 29573 WIRELESS VGA DEVICE ADAPTER - Manual (Page 13)

12
Figure: Pin Association Entry
P IN A SSOCIATION
For Pin Association, it is strongly recommended that you use a TruLink Wireless USB Host Adapter, as
some other Wireless USB host adapters may not support the feature. To pin associate with the TruLink
Wireless USB Host Adapter, please do the following:
1. Make sure the Wireless VGA Device Adapter Wireless/Wired switch is on Wireless.
2. Open the Wireless USB Manager, and click the Discovery button. The host adapter will look for the
Wireless VGA Device Adapter.
3. Once the Wireless VGA Device Adapter is located, you will
get the PIN Association dialog box that prompts you to enter
the PIN of the device. The default PIN of the TruLink Wireless
VGA Device Adapter is 1234. This number may be changed
and the procedure is described in the Appendix section of this
guide. Enter the PIN and then click the Accept Association
button.
4.
The necessary Wireless VGA Device Adapter drivers will
install automatically. The VGA Activity Indicator will light on,
and you are now ready to use the adapter
S OFTWARE /D EVICE I NSTALLATION