C2G 29571 WIRELESS USB DEVICE ADAPTER KIT - Manual (Page 27)

26
Figure: Cable Association
C ABLE A SSOCIATION P ROCEDURE
Cable association steps: Examples/Figures shown used with the association of the TruLink Wireless USB
to VGA Adapter
1. Make sure that the Wireless USB Manager is running. Check your Windows tray for the Wireless USB
Manager icon (Figure: Wireless USB Manager).
2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position
3. Power on your Wireless USB Device Adapter (TruLink Wireless USB to VGA Adapter).
4. Connect the USB cable between an available USB port on your computer and your Wireless USB
Device Adapter.
5. Complete cable association by pressing the “Accept Association” button when prompted. (Figure:
Cable Association)
6. Remove the USB cable from your Wireless USB Device Adapter and computer.
A PPENDIX