C2G 29563 7-Port USB 2.0 Aluminum Hub - Manual (Page 2)

5. Software Installation
¾ Windows 98SE:
1) The system will detect the hub and run “Add New Hardware Wizard.”
2) Press “Next” to proceed to the next screen.
.
3) Check the box to “Search for the best driver for your device” and press “Next”.
4) Leave all fields unchecked and press “Next” to advance to the next screen.
5) As you see the following screen, please press “Next”.
6) As you see the following screen, please press “Finish”.
¾ Windows ME/2000/XP:
Need no driver installation.
6. Verification
You can verify successful installation of your 7-Port USB 2.0 Hub by clicking on “My
Computer” then “View system information” then “Device Manager”. You should see
“Universal Serial Bus Controllers” in the “Device Manager” sheet.