AEG SCS51400S1 - Manual (Page 37)

x
x
If necessary cut the adhesive sealing strip
and apply it to the appliance as shown in
figure.
1
2
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
arrow (2) against the cupboard on the op-
posite side of the hinge.
4 mm
44 mm
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge is
44 mm.
The plastic spacer (in the accessories bag)
makes sure that the distance between the
appliance and the kitchen furniture is cor-
rect.
Make sure that the clearance between
the appliance and the cupboard is 4 mm.
Open the door. Put the plastic spacer in
position.
ENGLISH
37