AVSL Citronic PRO-2 MKII User Manual
Page 6
PRO-2 MKII User Manual
Troubleshooting:
NO OUTPUT -
Check power switch is on
Check leads and connections
Check MASTER LEVEL and mic or channel fader is turned up
Check CROSSFADER position
Check your sound source is playing
Check if the input switch is set to LINE or PHONO
DISTORTED OUTPUT -
Check line input isn't connected to PHONO
Check GAIN input levels
Check channel and MASTER faders are not too high
Check volume control of amplifier, active speakers or recording equipment
MICROPHONE FEEDBACK & OUTPUT
Eliminate “line-of-sight” between mic(s) and speakers
Check DELAY is not set too high
Adjust Hi or Lo EQ and/or level controls
No output – check if mic switched off
TOO QUIET -
Check turntable is not connected to line input
Check channel and MASTER VOLUME is not set to low
Check the Gain levels on each channel
Check for volume control on sound source