AVSL Citronic MINI:MIX2.0 - Manual (Page 3)

172.756UK User Manual
Rear Panel
Top Panel
Connection
Before connecting to amplifier or other equipment, turn down all volume controls to avoid loud
noises which may cause damage to other equipment. Always switch amplifier power on last in
line with volume levels down.
The Mini:Mix-2.0 can be used in conjunction with a PC or Mac computer by connecting both
rear panel USB connectors to the computer. CH A USB provides power to the Mini:Mix-2.0
If only one USB connection is required, use CH A USB to supply power to the Mini:Mix-2.0
The Mini:Mix-2.0 is plug & play compatible and should be recognized by the computer as a
generic USB audio device. If it is not detected, check the USB lead and download any updates
available for the operating system It may be necessary to change the computer’s audio
settings to select the Mini:Mix-2.0 as the active audio input or output device.
The Mini:Mix-2.0 can be used as a stand-alone audio mixer by selecting Line input for both
channels and connecting a USB power adaptor to the CH A USB connector (5Vdc, 500mA)
Using good quality RCA leads, connect AMP outputs from the Mini:Mix-2.0 to amplifier or
active speakers.
1. AMP main output L+R
2. REC recording out L+R
3. CH B USB connection
4. CH B Line input L+R
5. CH A USB connection
6. CH A Line input L+R
7. CH A line selector
8. MIC level slider
9. MIC input 6.3mm jack
10. CH A level slider
11. CUE select CH A/CH B
12. CROSSFADER CH A/CH B
13. Headphone level control
14. CH B level slider
15. Headphone outputs
16. MASTER level slider
17. CH B line selector