AVSL 160.463 QTFX-900 mkII - Manual (Page 4)

160.463UK User Manual
Wired remote control
 When the machine is ready to operate, the light on the remote control will illuminate.
You may now press the button for fog on demand.
 When the remote control light is off, the QTFX-900 mkII needs time to re-heat.
Do not attempt to produce fog until the light is lit.
RF remote control
 There is a group of 4 DIP switches on the side of the RF controller to select the group
Use only 1 switch at a time on any machine – more than 1 machine can be in a group
DIP switch 1 ON (2, 3, 4 OFF)= group 1
DIP switch 2 ON (1, 3, 4 OFF)= group 2
DIP switch 3 ON (1, 2, 4 OFF)= group 3
DIP switch 4 ON (1, 2, 3 OFF)= group 4
The provided wireless fob transmitter has 4 buttons to actuate any of the groups
 Heat up time is approximately 3-6 minutes. Please ensure that the remote button is not
pressed during the heat up time
 When the machine is ready to operate, the “Ready” LED will light on the RF receiver
You may now press the relevant group button for fog on demand
 When the “Heating” LED is lit, the QTFX-900 mkII needs time to re-heat.
Do not attempt to produce fog until the light is lit.
9. Ready to fog indicator
10.
Fog button (release to stop)
11. Heating LED
12. Ready LED
13. DIP switches
14. RF remote receiver
15. RF remote transmitter