AVSL 160.461 QTFX-400 - Manual (Page 3)

160.461UK User Manual
Rear Panel
Setting up
The QTFX-400 requires fog fluid to produce the effect.
It is recommended to use one of the range of qtx fog fluids for best results.
A chart for recommended fog fluids is included further along in this document
 Unscrew the top cap of the tank and remove to fill with the selected fog fluid
 Replace the cap and close securely, ensuring the pipe is fed down to the bottom of the
bottle so a consistent flow of fluid is supplied to the machine
 Connect the supplied remote control to the female IEC on the rear panel
 Connect the IEC mains plug
Operation
 Check the fog fluid level indicator at the rear and fill if necessary
 Switch the mains power on
 Heat up time is usually between 3-4 minutes. Please ensure that the remote button is
not pressed during the heat up time.
 When the machine is ready to operate, the light on the remote control will illuminate.
You may now press the button for fog on demand
 When the remote control light is off, the QTFX-400 needs time to re-heat. Do not
attempt to produce fog until the light is lit.
 During prolonged use, periodically check that the fluid level is not empty
 Switch off when not in use. Unplug from mains if not in use for long periods
1
Remote control connection
(IEC female)
2
Mains power on/off
rocker switch
3 Fog fluid fill level indication
4
Mains inlet (IEC male)
and fuse holder