AVSL 154.092 DM-X12 - Manual (Page 10)

Action : Action :
6) press and hold MODE button,then press the SCENES
buttons to select the DMXchannel.All LEDs will blink.
5) Press the TAP/DISPLAY button to switch
pages
7) Press and hold FINE & MODE buttons to exit
Notes : Notes :
You can re-assign the DMX channel to all controller
fader channels.
3.1.5 COPY SCANNER 3.1.5 COPY SCANNER
Example: Copying Scanner 1 into Scanner 2
Action : Action :
2) While holding button # 1 press SCANNER button # 2.
1) Press and hold SCANNER button # 1.
3) Release SCANNER button # 1 first before releasing
SCANNER button # 2.
Notes : Notes :
4) All SCANNER LED indicators will flash to confirm
successful copy.
To save time, you can copy the settings of one
Scanner button to another.
9/20
3.1.4 Review wheel assignment or reverse 3.1.4 Review wheel assignment or reverse
Action : (Reverse Review) Action : (Reverse Review)
2) press a SCANNER button to select a scanner
1) Press and hold FINE & MODE buttons together to
access the wheel assignment mode
Notes : Notes :
Action : (wheel assignment Review) Action : (wheel assignment Review)
2) press a SCANNER button to select a scanner
1) Press and hold FINE & mode buttons together (2)
times to access the channel reverse mode
3) Press and hold FINE & MODE buttons to exit
3) Press and hold FINE & MODE buttons together (2)
times to exit
DMX 512 CONTROLLER SERIES
USER MANUAL