AVSL 154.093 DM-X16 - Manual (Page 14)

3.4.9 DELETE ALL CHASE PROGRAMS 3.4.9 DELETE ALL CHASE PROGRAMS
Action : Action :
2) Press the desired CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
Notes : Notes :
I .e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action : Action :
2) Press and hold the BANK DOWN button and the
AUTO DEL button while turning ON the controller.
1) Turn OFF controller.
3) All LEDs will blink.
Notes : Notes :
3.5 Scene Programming (Steps) 3.5 Scene Programming (Steps)
Action : Action :
2) Select the BANK that contains the scene to be
copied using the BANK UP/DOWN buttons.
1) Press and hold the PROGRAM button to enter
programming mode.
3) Press the SCENE button that corresponds
to the scene to be copied.
Notes : Notes :
3.5.2 COPY A SCENE 3.5.2 COPY A SCENE
5) Select the destination BANK that contains the scene
memory to record onto using the BANK UP/DOWN
buttons.
3) Press the TAPSYNC DISPLAY to switch the LED
display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
5) Press MIDI/ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene
to be inserted.
8) Press MIDI/ADD button to insert the scene. All LEDs
will blink.
4) Press MIDI/ADD button to copy the scene.
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes
and program banks will be preserved.
3.5.1 INSERT A SCENE 3.5.1 INSERT A SCENE
6) Press the desired SCENE button to complete copy.
All LEDs will blink.
USER MANUAL 13/18
DMX 512 CONTROLLER SERIES