beautypg.com

Air Suspension C-2532 Rev 2 User Manual

Page 6

background image

6

C-2532RR REV 2 3/13/13

FIGURE 10-2

3.0 Remove the upper insulator.

4.0 Remove the shock absorber mounting bolts at the lower control arm. Remove the

shock absorber through the lower control arm from below. (FIGURE 10-3)











FIGURE 10-3

Installation:

1.0 Support the lower control arm with a suitable jack in order to align the tennon with

the mounting hole if equipped with selectable ride.

2.0 Install shock absorber through the lower control arm from below .

3.0 Connect tennon through the mounting hole in the upper spring pocket .

4.0 Align the shock absorber with the mounting hole in the lower control arm.

5.0 Install shock absorber mounting bolt to the lower control arm. Tighten to

manufacturer’s specifications.