beautypg.com

Air Suspension C-2532 User Manual

Page 7

background image

7

C-2532RR REV A

Installation:

1.0 Support the lower control arm with a suitable jack in order to align the tennon with

the mounting hole if equipped with selectable ride.

2.0 Install shock absorber through the lower control arm from below .

3.0 Connect tennon through the mounting hole in the upper spring pocket . (FIGURE

10-4)


4.0 Align the shock absorber with the mounting hole in the lower control arm.

(FIGURE 10-5)

5.0 Install shock absorber mounting bolt to the lower control arm. Tighten to 70 ft. lbs.

(25 Nm). (FIGURE 10-5)

6.0 Connect upper insulator to the shock absorber . (FIGURE 10-3)

7.0 Install nut to the tennon end. Do not tighten the nut.

8.0 Remove the safety stands.

9.0 Lower the vehicle. Hold the tennon end with a wrench while torquing the nut.

Tighten the nut to 15 ft. lbs. (20 Nm).