Air Suspension C-2532 User Manual
Page 6
6
C-2532RR REV A
Removal:
1.0 Raise and support the vehicle.
2.0 If equipped with selectable ride, disconnect the Real Time Damping (RTD) link rod
from the sensor. Grasp the connector lock tabs. Rotate the connector lock tabs (1)
and (2) counter-clockwise until the connector is unlocked. Disengage the
connector from the tennon by firmly pulling the connector up. Hold the tennon end
with a wrench while removing the nut. Remove the nut. (FIGURE 10-2)
FIGURE 10-2 FIGURE 10-3
4.0 Remove the upper insulator.
5.0 Remove the shock absorber mounting bolts at the lower control arm. Remove the
shock absorber through the lower control arm from below. (FIGURE 10-3)
See also other documents in the category Air Suspension For the car:
- A-2730 REV 1 (8 pages)
- A-2731 REV 1 (9 pages)
- SK-2716 REV 1 (6 pages)
- A-2239 REV 4 (7 pages)
- C-2130 REV 10 (13 pages)
- A-2133 REV 6 (9 pages)
- SK-2717 REV 1 (7 pages)
- P-2134 REV 5 (6 pages)
- AS-2744 REV 1 (6 pages)
- AS-2743 REV 1 (6 pages)
- AS-2561 REV 7_W CORE TOP (6 pages)
- AS-2563 REV 7_W CORE TOP (6 pages)
- P-2539 REV 5 (7 pages)
- AS-2560 REV 7_W CORE TOP (6 pages)
- AS-2562 REV 7_W CORE TOP (6 pages)
- C-2616 REV 1 (15 pages)
- A-2572 REV 4 (10 pages)
- A-2571 REV 4 (10 pages)
- P-2496 REV 3 (7 pages)
- A-2523 REV 5 (8 pages)
- P-2740 REV 1 (10 pages)
- AS-2581 REV 1 (6 pages)
- AS-2580 REV 1 (6 pages)
- P-2469 REV 3 (6 pages)
- P-2658 REV 1 (6 pages)
- A-2755 REV 1 (4 pages)
- AS-2306 REV 2 (4 pages)
- P-2494 REV 5 (6 pages)
- A-2465 REV 5 (5 pages)
- A-2502 REV 2 (4 pages)
- A-2504 REV 2 (4 pages)
- A-2501 REV 2 (4 pages)
- A-2503 REV 2 (4 pages)
- A-2464 REV 5 (5 pages)
- AS-2305 REV 2 (4 pages)
- P-2655 REV 1 (7 pages)
- A-2642 REV 1 (5 pages)
- A-2384 (3 pages)
- P-2136 REV 4 (5 pages)
- A-2610 REV 2 (3 pages)
- 93,96-CR Cadillac Front/Rear Shock Kit (7 pages)
- 93,96,97-CF Cadillac Strut (4 pages)
- 93,96-CR Cadillac Rear Air Shock Kit (4 pages)
- AS-2708 REV 1 (4 pages)