AIPTEK Aiptek3D iH3 - Manual (Page 10)

10
ENGLISH
Switching 2D/3D Mode
Press the 3D/2D Switch Button to toggle between 2D and 3D
modes.
In Playback mode, press the 3D/2D Switch Button to toggle
between viewing 2D or 3D fi les stored in your camcorder.
Note
In 2D mode, the camcorder only uses the right lens to record videos or take photos. •
The 3D fi les cannot be recorded/viewed/deleted in 2D mode, and vice versa. The 2D and 3D fi les are stored separately. •
This camcorder utilize • s the “Parallax Barrier” 3D technology. The parallax barrier is a special layer placed in front of the
LCD screen. In 3D mode, it allows each of your eye to see a different set of pixels on the screen (hence the 3D effect). The
brightness of the screen seems to be halved in 3D mode.
Taking Photos
1 Turn on the camcorder.
2 Compose your image.
Use the
•
Zoom Button to zoom in and out on the subject.
3 Press the Shutter Button to capture a photo.
Note
To avoid fuzzy photos, please hold the camera steady or use a tripod. •
In ord • er to optimize the 3D effect, the ideal shooting range is 1m~4m (3ft~13ft), and you are advised to take photos with
suffi cient light.
Recording Videos
1 Turn on the camcorder.
2 Compose your image.
3 Press the Record Button to start recording the video.
a. Use the Zoom Button to zoom in and out on the
subject.
b. To pause video recording, press the OK key. Press the
OK key again to resume recording.
c. When recording videos in a dark environment, press
the Left key to turn on video light to provide extra light
to the subject.
4 To stop video recording, press the Record Button again.
Basic Operations
2
3
1
3 a
3 3 b
3 c
Note
The engine will auto stop recording a video in 30 minutes. •