AIPTEK PocketCinema Z20 - Manual (Page 24)

20
9
Please unplug the USB cable for a second to exit Disk mode. Then restart your
computer then plug the USB cable again.
10
Please switch on the projector and wait until the picture below appears on the
projection screen. Select “USB Projection” and press OK.
11
) on the function bar of your PC.
Disk
USB Projection
Note 1: Right-click the projector icon and click
Screenshot to freeze the current projecting
screen. Just PC display is in working mode.
Note 2: Right-click the projector icon and click Start to
resume the real-time projecting.