AIPTEK PocketCinema V150W - Manual (Page 13)

User’s Manual
Page 13
EN
Projecting from Smartphones or Tablets
1. Connect smartphones supported MHL (Mobile High-Definition Link) for
projection.
Connect Samsung Galaxy S2, Note; new
HTC one, one X+, one X, one S; or Sony
Xperia Z with the projector via MHL (A to
USB D type HDMI) cable.
Connect Samsung Galaxy S4, Note II with
the projector via MHL (A to USB D type
HDMI) cable and Samsung 5 to 11 pin MHL
converter (as illustration shows) for projection.
Note: It’s normal that the projector is automatically charging the smartphones or
tablets when connected with the MHL cable for projection.
2. Connect iPhone 5 for Mirror projection
(with Lightning connector)
Connect iPhone 5, iPad 4th, iPad mini and
iPod touch 5th with the projector via Apple
Lightning Digital AV adapter and A-to-A
type HDMI cable.
iPhone 4S, 4, New iPad, iPad 2, and iPod touch (4 th ) can connect with projector
with Apple 30-pin digital AV adapter and A-to-A type HDMI cable
Charging the External Mobile Device
The internal battery of the projector cannot only be used for
projection, but also charge your mobile device.
1. Connect your mobile device to the projector via the USB
cable with the end of Type A connector plugged into the
USB port on the rear side of projector.
2. When the projector is powered on, the device will be
charged automatically.
3. When the projector is powered off, please press the
Source button ( ) to start or stop charging.
Note: The projector provides 5V/500mA output power for charging the mobile
devices.