AIPTEK MobileCinema Q20 - Manual (Page 13)

User’s Manual
EN
Troubleshooting
Symptom Check Point
The projector still can’t be
turned on after 10
seconds of waiting. Ensure the battery is fully
charged.
The projecting image is
too blurry. 1. Adjust the focus by using
focus wheel.
2. Check if the projection lens
is clean or not, clean it if
dirty.
The temperature of the
projector’s surface is
warm. It is normal for this projector to
generate moderate heat
during operation.
The projector does not
work when connecting to
a notebook PC. 1. Check if the HDMI cable is
plugged correctly.
2. Make sure the PC has been
switched to projector
display.
8